WATERJET Applications
- Stone and tile machining
- Job shop (general parts fabrication)
- Metal cutting (all metals)
- Aerospace machining (non heat-affected edge)
- Automotive parts manufacturing
- Gasket manufacturing (rubber products)
- Foam cutting
- Glass/ceramics machining
- Carpet cutting (pure water)
WATERJET Options
- Full range of tables sizes (4’ X 4’ to 20’ X 60’+)
- Full range of intensifiers (30 HP to 200 HP)
- 60K and 90K PSI options
- Abrasive and pure water heads
- Multiple heads for simultaneous machining of parts
- Closed water filtration systems
- Abrasive removal systems
- Chillers
1000 Series
The 1000W series water jet system is engineered for those who require an affordable pure water system that can be used to cut rubber, gaskets, and other materials that do not require abrasive additives. Available with a wide range of intensifiers, it comes in standard sizes up to 80” X 120”. The 1000 Series is a pure water powerhouse at a very affordable price.
View MultiCam 1000 Series WaterJet Details
Product CatalogThe low-cost MultiCam 1000 Series pure water jet is equipped with standard features normally only found on more expensive CNC waterjet cutting machines. The 1000 Series WaterJet features dual drives, an engineered aluminum extrusion frame, 25mm bearings throughout, and a state-of-the-art KMT Water Jet System, as well as the legendary ease-of-use of the MultiCam Controller.
For companies looking for value in a water jet cutter, the 1000 Series is the perfect solution.
1000 Series Standard Features:
No machine offers more standard features than the MultiCam:
- Custom engineered aluminum extrusion design for high strength and rigidity
- High-Speed contouring
- User-friendly MultiCam Controller
- Material Database
- Precision dual X-axis drives
- 8 Megabytes of Memory with unlimited file size transfer capabilities
- Standard Ethernet or RS232 direct connections
MultiCam EZ Control
- Hand held keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is included
- Bar-code scanning interface and 2D part digitizing are available options
Integratred Material Database
- Hand held keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is included
- Bar-code scanning interface and 2D part digitizing are available options
1000 Series Video
** All specs are subject to change.
3000 Series
The MultiCam 3000 Series Waterjet cutting system is an affordable, easy-to-use, production cutting solution designed for manufacturers that want the ability to cut a wide variety of materials. High-pressure waterjet machining also offers unique advantages over other cutting technologies allowing the user to cut highly accurate parts with excellent finish and no heat affected edge.
View MultiCam 3000 Series WaterJet Details
Product CatalogThe MultiCam 3000 Series Waterjet cutting system is an affordable, easy-to-use, production cutting solution designed for manufacturers that want the ability to cut a wide variety of materials. High-pressure waterjet machining also offers unique advantages over other cutting technologies allowing the user to cut highly accurate parts with excellent finish and no heat affected edge.
All 3000 Series WaterJet machining systems are manufactured using high-tolerance, large-scale CNC metalworking machines and are verified with certified laser calibration equipment. And every MultiCam 3000 Series waterjet also comes with the full support of the MultiCam Technology Center network, with over 70 locations worldwide. MultiCam sales, service, support and training are always nearby.
3000 Series Standard Features:
No machine offers more standard features than the MultiCam.
- All steel, stress relieved, integral water tank design
- Three (3) side cutting tank access for easy load and unload
- Integrated fork lift tubes for easy machine positioning and increased machine rigidity
- Heavy C channel guttering for water run-off and exceptional upper machine rigidity
- Moving gantry with dual side, brushless digital AC Full 360 degree bellows on all axes
- Fast switching between pure water and abrasive cutting
- Weir settling tank and sump pump
- MultiCam EZ control and EZ suite software
- Integrated PC with 19” LCD monitor
- Standard Ethernet interface with DNC file system and unlimited file size transfer capabilities
- NC Geomate software standard
- Full range of KMT intensifiers available
Yes, you do get Ethernet, Material Database, and one of the easiest to use hand held interfaces for no additional cost!
MultiCam EZ Control
- Hand held keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is include
- Bar-code scanning interface and 2D part digitizing are available options
Integratred Material Database
- Hand held keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is included
- Bar-code scanning interface and 2D part digitizing are available options
3000 Series Video
The Details:
Machine
- Z-Axis Clearance: 10"
- Z-Axis Travel: 8"
- Resolution: .0001"
- Repeatability: +/- .001"
- Positional Displacement Accuracy: +/- .005” over 10 feet
- Maximum Cutting Speed: 2,100 ipm
- Rapid Traverse: 1,500 ipm
- Drive System X and Y axis: Linear Rack and Pinion
- Drive System Z axis: Precision Ball Screw
- Drives: Brushless digital AC servo
Controller
- Type: Stand Alone CISC/iFPU
- Interface: RS232 or Ethernet / DNC
- Memory: 8 MB
- File Size Limit: Unlimited
- File Type: M & G codes (EIA 274D), U-Cito, & HPGL
Other Options
- Single or dual abrasive head assemblies
- Up to four pure water heads
- Pneumatic drill
- Integrated CNC Control air conditioner
- Chiller for the intensifier
- Abrasive removal systems
- Air ballast water leveling system
- Closed loop filtration systems
KMT Intensifiers for 3000 Series
- SL-V 15 HP .26 GPM Flow rate @60K PSI
- SL-V 30 HP .52 GPM Flow rate @60K PSI
- SL-V 50 HP .90 GPM Flow rate @60K PSI
- SL-V 60 HP 1.02 GPM Flow rate @60K PSI
- SL-V 75 HP 1.34 GPM Flow rate @60K PSI
- SL-V 100 HP 1.83 GPM Flow rate @60K PSI
- S-30 30 HP .52 GPM Flow rate @52K PSI
- SL-V E50 50 HP 1.00 GPM Flow rate @52K PS
** All specs are subject to change
6000 Series
The MultiCam 6000W series CNC water jet raises the bar when it comes to manufacturing excellence. Featuring a heavy duty, bridge and rail design, it is available in work envelopes up to 12’ X 50’+. When equipped with high horsepower intensifiers and multiple heads, the 6000W is capable of processing high volume, large format parts without sacrificing precision and accuracy. When the job calls for large work envelope, power and flexibility, the 6000W series water jet is the system of choice.
View MultiCam 6000 Series WaterJet Details
Product CatalogThe MultiCam 6000 Series CNC water jet cutting system is an affordable, highly accurate production cutting solution. The MultiCam 6000 Series machine raises the bar when it comes to manufacturing excellence. This system is manufactured using precision ground helical rack and pinion gears, 35mm linear bearing rails, and top of the line high precision planetary gearboxes. Your investment is protected with armoloy rail coatings, labyrinth seals, bellows, and built in self test routines. If that wasn't enough, the MultiCam gantry and X beams are welded, stressed relieved, and machined from heavy structural steel. It is no surprise that the MultiCam 6000 Series system is one of the more reliable, smoothest and accurate cutting systems on the market today.
6000 Series Standard Features:
No machine offers more standard features than the MultiCam.
- Digital Brushless AC Servos provide high-speed contouring
- Fully programmable retract between cuts
- User friendly MultiCam Controller
- Standard Ethernet interface with DNC file system with unlimited file size transfer capabilities
- Material Database accessible via hand-held keypad
- Modular X-axis beams are made from heavy tubing with machined bearing references
- Massive 35mm linear bearings
- Helical rack and pinion
- High precision planetary gearboxes with 1 arc minute backlash and 5 year warranty.
- All axis are environmentally protected by bellows
- Single or multiple head configurations available
- Fast switching between pure water and abrasive cutting
- Tool-free, hand tightening abrasive nozzle design
- Tighter water jet stream for increased cutting speed
- Stress-relieved heavy-duty all steel construction.
Yes, you do get Ethernet, Material Database, and one of the easiest to use hand held interfaces for no additional cost!
MultiCam EZ Control
- Hand held keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is include
- Bar-code scanning interface and 2D part digitizing are available options
Integratred Material Database
- Hand held keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is included
- Bar-code scanning interface and 2D part digitizing are available options
6000 Series Video
The Details:
Machine
- Z-Axis Clearance: 10"
- Z-Axis Travel: 12"
- Resolution: .0001"
- Repeatability: +/- .001"
- Rapid Traverse: 2,700 ipm
- Drive System X and Y axis: Helical Rack and Pinion
- Drive System Z axis: Ball Screw
Controller
- Type: Stand Alone CISC/iFPU
- Interface: RS232 or Ethernet / DNC
- Memory: 8 MB File Size Limit: Unlimited
- File Size Limit: Unlimited
- File Type: M & G codes (EIA 274D), U-Cito, & HPGL
Other Options
- CAD/CAM Software
- CE Certification / UL Listing
- Abrasive Cutting Head
- Abrasive Metering System
- Abrasive Hopper (500lb capacity)
- Garnet Removal System
- Settling Weir
- Water Recycling System
- Intensifier Water Chiller
- Bar-code scanning interface
- Industrial PC Workstation (Optional)
KMT Intensifiers for 6000 Series
- SL-V 15 HP .26 GPM Flow rate @60K PSI
- SL-V 30 HP .52 GPM Flow rate @60K PSI
- SL-V 50 HP .90 GPM Flow rate @60K PSI
- SL-V 60 HP 1.02 GPM Flow rate @60K PSI
- SL-V 75 HP 1.34 GPM Flow rate @60K PSI
- SL-V 100 HP 1.83 GPM Flow rate @60K PSI
- S-30 30 HP .52 GPM Flow rate @60K PSI
- SL-V E50 50 HP 1.00 GPM Flow rate @52K PS
** All specs are subject to change
** All specs are subject to change
What machine is right for your company?
Check out our Full Product Line.
